|
|
Apartment building
Kirová, Šárka ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
This bachelor's thesis deals with project documentation for the construction of an apartment house in Přelouč. The proposed building has four floors, no basement with 15 residential units, technical facilities and 14 individual garages. Vertical load-bearing and non-load-bearing structures are designed from Porotherm ceramic blocks. The perimeter masonry is contact insulated with facade expanded polystyrene and plastered with a thin layer of gray and white plaster. The fillings of the openings are plastic windows, including plastic entrance doors with a side skylight. Horizontal structures form monolithic reinforced concrete slabs reinforced unidirectionally or in both directions. The roof of the building consists of a flat roof with a vegetation layer. The apartment building is based on simple concrete foundation strips. The building is designed regarding the existing surrounding housing development. Part of the bachelor's thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
The accommodation facility of Blanice
Bače, Jakub ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with the elaboration of the project documentation of the construction of the Blanice accommodation facility. The object has a rectangular shape. The proposed building is located in Vodnany. The accommodation facility is designed for 28 people and 32 seats in the restaurant. The building is designed as a four-storey, partly basement. On the underground floor there are storage areas, technical background. On the first floor there is a main entrance, a reception and a restaurant with technical facilities for the staff. On the second and third floor there are guest rooms. On the second floor there is also a room for people with limited mobility. The building is bricked from brick blocks with a flat roof Keywords.
|
|
|
Apartment building
Marek, Václav ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is a new building of an apartment house in Chotěboř. The apartment building is designed from the four-storey part and from the five-storey part, the floors are finished with a residential attic. The apartment building is connected to the existing housing development, installed in a slightly sloping terrain. The apartment building contains seventeen housing units, the apartments are designed for housing four-member families, while apartments of the studio type are designed for two persons. The first floor is designed for the technical facilities of the building, there is also a commercial area that is considered for the operation of a hairdresser. Other above-ground floors consist of housing units. The apartment house is covered with a saddle seddle roof, in the part of the fifth floor there is also an outdoor terrace with a flat roof. The vertical load-bearing and non-load-bearing structures are formed by the Porotherm brick system. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The foundation structures are made of monolithic concrete and monolithic prefa. The parking space is designed outside the building, with parking for the disabled. The project was developed in the ArchiCad graphics program. All constructions comply with valid standards and regulations.
|
|
|
Accommodation facility
Šindlář, Josef ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of this master thesis is a project for the construction of accommodation facility with a basement. The building is located in Ostrava close to the historical centre of the city. The building is a 4starcategory accommodation facility and will serve as temporary accommodation. There will be a restaurant and a gym designed for hotel guests only. The accommodation capacity is 68 guests. A car park for hotel visitors is situated close to the hotel. It is a brick structure made of sand-lime blocks,monolithic ceilings and a first underground floor. The building is insulated with ETICS system. Paste-like plaster and brick tapes were used for facade construction. The roof is made up of one roof surface and the foundation will be realized on the foundation strips. The building is situated on flat terrain. The project was developed in ArchiCad21, AutoCad 2016 and SketchUp.
|
|
|
Library in České Budějovice
Ernst, Oliver ; Blažek, Petr (referee) ; Čupr, Karel (advisor)
Diploma thesis deals with a project of a new building of a new science library building. The building has four floors and basement. The building will be located in České Budějovice town. The building fulfills the function of the study of books and technical standards. There is designed spaces for organizing lectures and refreshments in cafeteria in the first floor of the building. Library space made available barrier free. Its architectural design resembles the shape of an open book. The structural system meets modern trends in construction and architecture, and it does not interfere with the surrounding buildings.
|
|
|
Multifunctional Building
Teplý, Jan ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
The dissertation contains the project and working out of the designing documentation for execution of a multifunctional building. The project deals with a new multifunctional building in the marginal part of the Olomouc city. The object is a brick building with no cellar and four above-ground floors. The ground plan of the building is regular and mainly rectangular. There are balconies at the corner and in the middle of the eastern part of building in above-ground floors. The last floor is partially receding and there are two terraces here. There is the flat roof construction. The horizontal and vertical supporting and non-supporting constructions are suggested from the Heluz´s brick system. There are three places of business on the ground floor and ten flats on the above-ground floors. The building site has a plane terrain.
|
|
|
Apartment house
Rozhoň, Ivan ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
Four-storey, basementless apartment house with single skin flat roof. Permanent shuttering system VELOX is used for vertical and horizontal bearing constructions. The apartment house contains twelve apartments.
|
|
|
Apartment building in Lipník nad Bečvou
Špunarová, Ivana ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The goal of bachelor thesis was to prepare project documentation for realization of new apartment house in Lipník nad Bečvou. The detached building has 4 floors without basement. The object is located on flat terrain. In the first floor is common entrance into building, also as technical building equipment room and 4 garages. There is a staircase and an elevator located in the core of the building. On the others floors of the building are 9 apartments about various size and layout. On the second floor is located barrier free apartment. On the 4th floor is spacious roof terrace. The construction system of the building is longitudinal, built by sand lime blocks Silka. The object is equipped by contact thermal insulation system ETICS. The horizontal structure is designed as a filigree ceiling. Single-skin flat roof is covered by surface layer of PVC foil. Colors of facade are in shades of white and brown. The bachelor's thesis includes studies, drawings, technical reports of documentation for the construction and fire safety solutions for the assessment of building physics.The aim was to accomplish functional apartment house which will be designed according to applicable standards and requirements.
|
guest ::
